Browsing Mechanical Engineering (ME) by Title
Now showing items 333-352 of 450
-
Semisolid Die Casting of Wrought A6061 Aluminium Alloy
(2018-04-02)The mechanical properties achieved with high performance wrought aluminium alloys are superior to cast aluminum alloys. To obtain an intricate shaped component, wrought alloys are commonly subjected to forging followed by ... -
A shape optimization approach for simulating contact of elastic membranes with rigid obstacles
The obstacle problem consists in computing equilibrium shapes of elastic membranes in contact with rigid obstacles. In addition to the displacement u of the membrane, the interface on the membrane demarcating the ... -
Shock Dynamics due to Downstream Pressure Perturbations: Idealization of Transonic Unstarted Cascade Flutter
Shock wave unsteadiness is an important phenomenon in high-speed aerodynamics. This phenomenon is observed in many locations of high-speed vehicles, such as supersonic inlets, ramjet engines, transonic airfoils, high-speed ... -
Shock Wave-boundary Layer Interaction in Supersonic Flow over Compression Ramp and Forward-Facing Step
(2018-01-12)Shock wave-boundary layer interactions (SWBLIs) have been studied ex-tensively due to their practical importance in the design of high speed ve-hicles. These interactions, especially the ones leading to shock induced ... -
Simple Models For The Mean And Transient Intertropical Convergence Zone And Its Northward Migration
(2011-11-16)Satellite data have shown that east-west oriented cloud bands, known as Intertropical convergence zone (ITCZ), propagate eastwards along the equator throughout the year and northwards during boreal summer on intraseasonal ... -
Simulation and Study of Noise Generated due to Turbulent Boundary Layer in Towed Hydrophone Array
In this thesis, a wave propagation based analytical model is developed for an underwater towed array. The towed array is modeled as an in finite tube filled with a certain liquid and submerged in an in finite volume of ... -
Single and twin liquid jet injection in crossflow: Influence of Mach number and jet spacing
Supersonic air-breathing engine development towards hypersonic vehicles is challenging due to flow complexities arising from compressibility effects. In these engines, the incoming crossflow air enters the combustor at ... -
Single Cavity Trapped Vortex Combustor Dynamics : Experiments & Simulations
(2011-04-06)Trapped Vortex Combustor (TVC) is a relatively new concept for potential use in gas turbine engines addressing ever increasing demands of high efficiency, low emissions, low pressure drop, and improved pattern factor. This ... -
Single-Phase And Multi-Phase Convection During Solidification Of Non-eutectic Binary Solutions
(2014-10-20)During solidification of non-eutectic alloys, non-isothermal phase change causes dendritic growth of solid front with liquid phase entrapped within the dendritic network producing the mushy region. Solidification causes ... -
Solar spectral diffuse radiance for a specified atmosphere
In many applications such as the design and performance evaluation of solar energy devices, remote sensing studies, meteorological and climatological studies, it is necessary to know the values of solar radiation reaching ... -
Some approximate methods of analysis of Non-Linear Dynamical systems
The present investigation concerns some approximate methods of analysis in the area of non-linear oscillations. The analysis includes the steady-state as well as the transient response of non-linear systems. In both cases, ... -
Sound Radiation from Rectangular Panels with Rectangular Cut-out/s
This is largely an analytical investigation and the objective of this study is to compute sound power radiated from rectangular panels that are placed in an infinite baffle (or a rigid wall) and that have rectangular ... -
Spatio-temporal Dynamics in Droplet Combustion Under Diverse Flow Conditions
Spray combustion of liquid fuels is one of the most ubiquitous modes of combustion used in a wide range of applications ranging from IC engines for transportation to Gas turbines in propulsion systems, owing to the high ... -
Specification and Verification of Tolerances for Parts with Free-Form Surfaces
(2017-11-27)The need for increased product variety and improved aesthetics require the manufacturing enterprise to reduce time to market and to increase use of free-form surfaces in the form of the product. These changes lead to ... -
Spherical Indentation Response of Bulk and Thin Film Shape Memory Alloys
Shape memory alloys (SMAs) have the ability to recover large strains upon undergoing a thermomechanical cycle. In addition to being used as structural elements, they can be patterned as thin films which can be employed in ... -
Stability Of Double-Diffusive Finger Convection In A Non-Linear Time Varying Background State
(2010-09-06)Convection set up in a fluid due to the presence of two components of differing diffusivities is known as double diffusive convection. Double diffusive convection is observed in nature, in oceans, in the formation of certain ... -
Stability of unbounded and bounded granular shear flows
Recent computer simulations of granular flows (Hopkins & Louge 1991; Goldhirsch, Kui & Zanetti 1993) have identified an interesting picture of cluster formation. In this thesis, we have attempted to explain particle ...