Recently added

Mechanical Behavior Of B-Modified Ti-6Al-4V Alloys

Sen, Indrani (2011-09-20)

Titanium alloys are important engineering alloys that are extensively used in various industries. This is due to their unique combination of mechanical and physical properties such as low density combined with high strength ...

Indentation Strength Of Piezoelectric Ceramics

Kamble, Sandeep Namadev (2011-08-30)

Precipitate Growth Kinetics : A Phase Field Study

Mukherjee, Rajdip (2011-08-30)

Rapid Solidification Behaviour Of Fe-Ge Intermetallic Compounds

Biswas, Krishanu (2011-08-30)

Development And Study Of Oxide Films By Combustion Flame Pyrolysis

Kavitha, R (2011-08-29)

Damage Characterization Studies On The Environmentally Degraded (Short-Term Aged) Polymer Matrix Composite Materials Subjected To Single And Repeated Low-Velocity Impacts

Niranjanappa, A C (2011-08-29)

Surface Chemical Studies On Oxide And Carbide Suspensions In The Presence Of Polymeric Additives

Saravanan, L (2011-08-26)

Synthesis And Phase Transformation Behaviour Of Nanoscaled Alloys Embedded In Aluminium

Bhattacharya, Victoria (2011-08-26)

Optimisation Of Process Parameters For Spray Deposition And Analyses Of Spray Deposits For 7075 Al Alloy

Jeyakumar, M (2011-08-25)

Creep And Grain Boundary Sliding In A Mg-0.7% Al Alloy

Kottada, Ravi Sankar (2011-08-25)

Degradation Of Water Soluble Polymers

Vijayalakshmi, S P (2011-08-25)

A Cold Model study Of Raceway Hysteresis

Sarkar, Sabita (2011-08-24)

Processing, Characterization And Mechanical Properties Of Functionally Graded Materials

Bakshi, Sarmistha (2011-08-24)

Glass Forming Ability And Stability : Bulk Zr-Based And Marginal Al-Based Glasses

Basu, Joysurya (2011-07-18)

Thermodynamics And Phase Equilibria In The Systems Involving Electronic Materials

Acharya, Sibasis (2011-07-18)

Mathematical Model Of COREX Melter Gasifier

Pal, Subrata (2011-07-18)

Studies On The Bioremoval Of Zinc And Cadmium Using Desulfotomaculum nigrificans

Radhika, V (2011-07-18)

Zr-based Bulk Metallic Glass A Study Of Processing, Welding And Subsurface Deformation Mechanism

Bhowmick, Ranadeep (2011-07-18)

Fabrication Of Epoxy Composites With CTBN And Fly Ash As Individual And Hybrid Fillers : Studies On Curing Schedule And Mechanical Properties Under Static And Dynamic Loading Conditions

Santra, Sanjitarani (2011-07-15)

Processing And Characterization Of Fly Ash Particle Reinforced A356 Al Composites

Sudarshan, * (2011-07-15)

Materials Engineering (MatEng): Recent submissions

Mechanical Behavior Of B-Modified Ti-6Al-4V Alloys ﻿

Indentation Strength Of Piezoelectric Ceramics ﻿

Precipitate Growth Kinetics : A Phase Field Study ﻿

Rapid Solidification Behaviour Of Fe-Ge Intermetallic Compounds ﻿

Development And Study Of Oxide Films By Combustion Flame Pyrolysis ﻿

Damage Characterization Studies On The Environmentally Degraded (Short-Term Aged) Polymer Matrix Composite Materials Subjected To Single And Repeated Low-Velocity Impacts ﻿

Surface Chemical Studies On Oxide And Carbide Suspensions In The Presence Of Polymeric Additives ﻿

Synthesis And Phase Transformation Behaviour Of Nanoscaled Alloys Embedded In Aluminium ﻿

Optimisation Of Process Parameters For Spray Deposition And Analyses Of Spray Deposits For 7075 Al Alloy ﻿

Creep And Grain Boundary Sliding In A Mg-0.7% Al Alloy ﻿

Degradation Of Water Soluble Polymers ﻿

A Cold Model study Of Raceway Hysteresis ﻿

Processing, Characterization And Mechanical Properties Of Functionally Graded Materials ﻿

Glass Forming Ability And Stability : Bulk Zr-Based And Marginal Al-Based Glasses ﻿

Thermodynamics And Phase Equilibria In The Systems Involving Electronic Materials ﻿

Mathematical Model Of COREX Melter Gasifier ﻿

Studies On The Bioremoval Of Zinc And Cadmium Using Desulfotomaculum nigrificans ﻿

Zr-based Bulk Metallic Glass A Study Of Processing, Welding And Subsurface Deformation Mechanism ﻿

Fabrication Of Epoxy Composites With CTBN And Fly Ash As Individual And Hybrid Fillers : Studies On Curing Schedule And Mechanical Properties Under Static And Dynamic Loading Conditions ﻿

Processing And Characterization Of Fly Ash Particle Reinforced A356 Al Composites ﻿