Carbon fiber-reinforced epoxy (CFRE) laminates have become a significant component in aircraft industries over the years due to their superior mechanical and highly tunable properties. However, the interfacial area between ...

On the creep behavior of Ni based solid solution alloys from binary to quaternary A power-law relationship between the steady state strain rate (𝜀̇) and imposed stress (σ) is well established so that the 𝜀̇∝𝜎^𝑛, at a ...

Metallic materials are used for osteosynthesis, and outcomes are expected to be complete healing. The latter part generally becomes unachievable when human subjects need complicated surgery. This situation generally requires ...

Monitoring pollution levels and extent is crucial for preserving our environment's sustainability. Advances in the technology sector, facilitated by new materials and methods, have significantly improved. Nonetheless, these ...

The electrodeposited/electroplated Sn has been used as a protective coating to enhance corrosion resistance, anode material for rechargeable Li-ion battery as an alternative to graphite, decorative finishes, and electronic ...

Superalloys are special class of high temperature alloys that are used for making components in gas-turbine engines, catalytic reactors which are exposed to highly corrosive atmospheres. These alloys have exceptional ...

Carbon fiber reinforced polymer (CFRP) laminates are currently used in commercial aircrafts replacing their metallic counterparts. Epoxy is used as matrix in CFRPs in the primary structures of aircrafts such as fuselage, ...

Additive manufacturing (AM) is one of the emerging technologies to manufacture near-net-shape engineering components layer-by-layer using a suitable heat source. The rapid adoption of AM in the field of aerospace owes to ...

Globally, 70 million tons of epoxy thermosets are manufactured at a perplexing rate which constitutes approximately a quarter of polymer generation by weight. A thermosetting polymer contains a permanent crosslinked network ...

Near β and metastable β-titanium alloys are difficult to process due to narrow processing window. Lower processing temperature causes difficulty in recrystallization of these alloys especially in the two phase conditions, ...