Browsing Materials Engineering (MatEng) by Subject "microstructure"
Now showing items 1-7 of 7
-
Co-continuous microstructures through spinodal decomposition in ternary systems: A phase field study
We have studied spinodal decomposition which leads to a three-phase microstructure in ternary alloys using computer simulations based on the ternary Cahn-Hilliard equations. All the alloys we have studied are in the same ... -
Effect of thermo-mechanical treatment on the evolution of microstructure and mechanical properties in a β and a β rich α+β titanium alloy
Near β and metastable β-titanium alloys are difficult to process due to narrow processing window. Lower processing temperature causes difficulty in recrystallization of these alloys especially in the two phase conditions, ... -
Evolution of oxide layers in heat-treated and deformed CMSX-4 superalloy in different atmospheres at 900oC
Superalloys are special class of high temperature alloys that are used for making components in gas-turbine engines, catalytic reactors which are exposed to highly corrosive atmospheres. These alloys have exceptional ... -
Exotic eutectic microstructures
Solidification of eutectic systems delivers compelling examples of microstructure formation, which makes the phenomena intriguing to many engineers and scientists. Therefore, eutectic solidification is extensively studied ... -
Exploring the atomic-level solute-defect interactions for designing high-performance disordered Ni-Co base alloys and ordered Ni base superalloys
For structural applications, a major section of high-strength alloys, such as steels, superalloys, etc., has a base element of iron, nickel, cobalt, titanium, aluminium or their combinations. Such materials enable ... -
High-Throughput Bending Tests for Investigating Creep Behavior Affected by Structural and Microstructural Inhomogeneities
The bending of cantilevers is an alternate technique for the extraction of power-law creep parameters of materials. It has been shown earlier that in homogeneous systems showing tension-compression symmetry, digital image ... -
Microstructure – texture - mechanical property correlation in additively manufactured stainless Steel 316L and Cu-Ni-Sn
Metal additive manufacturing (AM) has gained considerable interest in recent years because of its ability of near net shape building of the components, one-go production, ability to make intricate designs and minimized ...