Browsing Materials Engineering (MatEng) by Subject "Aluminium Alloys"
Now showing items 1-11 of 11
-
Experimental and Numerical Investigation on Friction Welding of Thixocast A356 Aluminium Alloy
(2017-12-01)The challenges of weight reduction and good strength in automotive industry have drawn considerable interest in thixocasting technologies. Joining of such components with conventional fusion welding creates voids, hot ... -
Improvement of High Temperature Strength of Al and Co Alloy by L12 Type Coherent Precipitates
The present work aims at developing a new class of high temperature alloys based on ordered intermetallic compound that forms coherently with the matrix during solid state transformation. The chosen intermetallics have ... -
Processing And Characterisation Of Bulk Al2 O3 p /AIN-Al Composites By Pressureless Infiltration
(Indian Institute of Science, 2005-12-22)Al-Mg alloys were infiltrated into porous alumina preforms at temperatures greater than 950°C where significant amount of nitride forms in the matrix. The present work aims to obtain a process window for growing A1N rich ... -
Processing, Characterization And Evaluation Of A Functionally Graded Ai - 4.6% Cu Alloy
(Indian Institute of Science, 2005-12-22)In some applications the stress across the entire cross-section of a component is not uniform but varies with position. For example, maximum shear stress is highest at the inner surface of a thick-walled cylinder subjected ... -
Studies Of Glass Formation In Al-La-Ni And Mg-TM-RE Alloys With A Structure Mapping Approach
(2010-07-14)The glass-forming composition ranges in Al-La-Ni and Mg-TM (Cu, Zn)-Y alloys were predicted using Miedema’s model. Glass-forming abilities of Al-La-Ni alloys and Mg-Cu-RE alloys were studied in terms of reduced glass ... -
A Study Of Crystallographic Texture, Residual Stresses And Mechanical Property Anisotropy In Aluminium Alloys For Space Applications
(2013-05-21)Aluminium alloys, which are the most widely used materials in the aircraft and aerospace industries, find their applications due to high strength–to-density ratio, resistance to catastrophic fracture, high degree of ... -
Study Of Friction And Wear Behaviour Of Nano-Embedded Aluminium Alloys
(Indian Institute of Science, 2005-12-22)In general, the bearing alloys have two types of microstructure i.e., either a soft matrix with discrete hard particles or a continuous matrix of the harder metal with small amount of the softer metal finely dispersed in ...