Rammed earth is a monolithic construction formed by compacting processed soil in progressive layers. Rammed earth is used for the construction of load bearing walls, floors, sub base material in roadways, airport runways, ...

Liquefaction is a phenomenon in which soil loses a large percentage of its shear resistance due to increased pore water pressure and flows like a liquid. Undrained cyclic loading conditions during earthquakes cause ...

The introductions of large digital computers in the field of engineering have rendered possible the solution of a wide variety of problems without the need to violate the equilibrium and compatibility. The major requirement ...

Limit analysis is a very powerful tool to find accurate solutions of several geotechnical stability problems. This analysis is based on the theory of the plasticity and it provides two limiting solutions within lower and ...

The static cone penetration tests are quite extensively used for carrying out in-situ geotechnical investigations both for onshore and offshore sites especially where the soil mass is expected to comprise of either soft ...

Soft soil deposits of coastal regions and lowland areas pose many geotechnical problems but it is indispensable to utilize these grounds to meet the growing demand for infrastructure with ever increasing urbanization and ...

Most soil particles loses cohesion and split up the soil mass into individual soil grains when they come in contact with water and get saturated. In dispersive soils the particles detach more spontaneously from each other ...

The soil strata is often subjected to various kinds of vibrations such as that caused by earthquakes, water waves, traffic loads, wind power plants, construction related equipments, pile driving and vibratory machines. The ...