Browsing Aerospace Engineering (AE) by Title
Now showing items 77-96 of 400
-
Design And Development Of Diaphragmless Hypersonic Shock Tunnel
(2011-03-16)The growing requirements to achieve hypersonic flights, as in the case of reentry vehicles, pose a serious challenge to the designers. This demands an understanding of the features of hypersonic flow and its effect on ... -
Design and Development of Piezoelectric Stack Actuated Trailing Edge Flap for Helicopter Vibration Reduction
(2018-01-09)This research investigates on-blade partial span active plain trailing edge flaps (TEFs)with an aim to alleviate the helicopter vibrations. Among all the available smart materials, piezoelectric stack actuator(PEA)has shown ... -
Design and Performance Analyses of Osculating Cone Waveriders
Modern mission requirements for long-range maneuverable hypersonic vehicles for space, military, and transportation applications necessitate vehicle design innovations. The primary challenges that a hypersonic vehicle ... -
Design and Performance Investigation of Supersonic Air-Intakes
Supersonic air-intake is an essential component of a ramjet engine. Typically, a ramjet powered missile that operate over a range of Mach numbers and maneuverability conditions uses a fixed geometry intake to ensure ... -
Design of Curved Aggressive Annular Diffusers
For economical air transportation, aero engines with lower specific fuel consumption, lower emissions and lower noise levels are required. To this end, the use of turbofan engine with high bypass ratio is an option. With ... -
Design of Planar Supersonic Wind Tunnel Nozzle
This thesis revisits the design of a planar supersonic nozzle for a supersonic wind tunnel using the method of characteristics (MOC) and Computational Fluid Dynamics (CFD). While design of a converging-diverging (CD) ... -
A Design Procedure for Flapping Wings Comprising Piezoelectric Actuators, Driver Circuit, and a Compliant Mechanism
(2018-06-05)Flapping-wing micro air vehicle (MAV) is an emerging micro-robotic technology, which has several challenges toward its practical implementation. Inspired by insect flight, researchers have adopted bio-mimicking approach ... -
Design, Control and Experimental Validation of a Robust Adaptive Feedback Linearization Controller for a Quadcopter Manipulator System
A quadcopter manipulator system (QMS) is an aerial robot comprising a quadcopter with a three degree of freedom manipulator mounted at the bottom of the vehicle. An aerial robot can reach otherwise inaccessible ... -
Design, Development And Flight Control Of Sapthami - A Fixed Wing Micro Air Vehicle
(2010-09-21)Two micro air vehicles, namely Sapthami and Sapthami-flyer, are developed in this thesis. Their total weight is less than 200grams each. They fit inside a 30cm and 32cm sphere respectively and carry the commercially available ... -
Determination Of Isopectral Rotating And Non-Rotating Beams
(2016-04-27)In this work, rotating beams which are isospectral to non-rotating beams are studied. A rotating beam is isospectral to a non-rotating beam if both the beams have the same spectral properties i.e; both the beams have the ... -
Development and Application of Kinetic Meshless Methods for Euler Equations
(Indian Institute of Science, 2005-10-17)Meshless methods are a relatively new class of schemes for the numerical solution of partial differential equations. Their special characteristic is that they do not require a mesh but only need a distribution of points ... -
Development And Design Optimization Of Laminated Composite Structures Using Failure Mechanism Based Failure Criterion
(2009-04-27)In recent years, use of composites is increasing in most fields of engineering such as aerospace, automotive, civil construction, marine, prosthetics, etc., because of its light weight, very high specific strength and ... -
Development Of A New Finite-Volume Lattice Boltzmann Formulation And Studies On Benchmark Flows
(2011-06-30)This thesis is concerned with the new formulation of a finite-volume lattice Boltzmann equation method and its implementation on unstructured meshes. The finite-volume discretization with a cell-centered tessellation is ... -
Development Of A Plume With Off-Source Volumetric Heating
(2012-11-07) -
Development Of Gyroless Attitude And Angular Rate Estimation For Satellites
(2011-04-06)Studies aimed at the development of indigenous low cost star tracker and gyroless attitude and angular rate estimation is presented in the thesis. This study is required for the realization of low cost micro satellites. A ... -
Development of Novel Heat Transfer Gauges Based on Large Carbon Clusters to Measure Total as well as Radiative Heat Flux for Planetary Entry Configurations in Hypersonic Shock Tunnels
The quest of travelling beyond earth, preludes with ground based experimental studies, detailed analysis and accurate calculations in the aspects of having a safer design of flying vehicles. As the vehicles plunge into the ... -
Development of Spatio-Temporal Multi-Task Assignment Approaches for Perimeter Defense Problem
Rapidly evolving technologies in the autonomous operation of Uninhabited Aerial Vehicles (UAVs) and associated developments in low-cost sensors have created significant interest among researchers in using them for various ...