Browsing Aerospace Engineering (AE) by Subject "Aerospace Engineering"
Now showing items 61-80 of 95
-
Lattice Boltzmann Relaxation Scheme for Compressible Flows
(2018-03-09)Lattice Boltzmann Method has been quite successful for incompressible flows. Its extension for compressible (especially supersonic and hypersonic) flows has attracted lot of attention in recent time. There have been ... -
LES Study Of Free Jets And Jets Impinging On Cuboidal Cavity
(2016-09-15)Numerical solutions based on explicit filtered LES for computing turbulent flow field, of free round jets and impinging round jet on cuboidal cavities, are presented and discussed in this dissertation work. One-parameter ... -
Linear Stability Models for Reacting Mixing Layers
(2018-03-12)We develop a physics-based reduced-order model of the aero-acoustic sound sources in reacting mixing layers as a method for fast and accurate predictions of the radiated sound. Instabilities in low-speed mixing layers are ... -
Mechanical Characterization of Carbon Nanotubes and Nanocomposites
(2018-08-14)Measurement of all the mechanical properties of carbon nanotubes is extremely difficult because of its small size. In the present work, all the five transverse isotropic properties of single wall carbon nanotubes (SWCNTs) ... -
Microgravity Flow Transients in the Context of On-Board Propellant Gauging
(2018-02-15)It is well known that surface tension of a liquid has a decisive role in flow dynamics and the eventual equilibrium state, especially in confined flows under low gravity conditions and also in free surface flows. One such ... -
Mixing Enhancement Studies on Supersonic Elliptic Sharp Tipped Shallow (ESTS) Lobed Nozzles
(2017-11-22)Rapid mixing and spreading of supersonic jets are two important characteristics in supersonic ejectors, noise reduction in jets and fuel mixing in supersonic combustion. It helps in changing the acoustic and thermal signature ... -
Modeling and Simulation of Biomolecular Flow in Microchannel
(2018-01-01)Microfluidics deals with the behavior, control and manipulation of fluids which are confined at micrometer length scale. It has important application in lab-on-a chip technology, micro-propulsion, additive manufacturing, ... -
Modeling of Contact in Orthotropic Materials using Variational Asymptotic Method
(2018-06-18)Composites are materials which cater to the present and future needs of many demanding industries, such as aerospace, as they are weight-sensitive for a given requirement of strength and stiff ness, corrosion resistant, ... -
Modelling Simulation and Statistical Studies of Primary Fragmentation of Coal Particles Subjected to Detonation Wave
(2018-08-11)Coal is likely to remain an important energy source for the next several hundred years and hence advances in coal combustion technologies have major practical impact. Detonation combustion of coal initiated by a plasma ... -
NEW PERSPECTIVES FOR ANALYZING THE BREAKUP, ENVIRONMENT, EVOLUTION, COLLISION RISK AND REENTRY OF SPACE DEBRIS OBJECTS
(Indian Institute of Science, 2005-03-10)In the space surrounding the earth there are two major regions where orbital debris causes concern. They are the Low Earth Orbits (LEO) up to about 2000 km, and Geosynchronous Orbits (GEO) at an altitude of around 36000 ... -
A Numerical Study of Changes to Flow Organization and their Prognostic Measures
(2018-05-23)Flow induced self-oscillations cause acoustic pressure oscillations of large amplitude in pipe flows. If Reynolds number is treated as a parameter, these floinduced oscillations occur only at discrete and critical values ... -
On the Contribution of the Launch Platform towards Acoustic Environment of a Launch Vehicle at Lift-off
A launch vehicle experiences intense acoustic loading in the initial phase of its lift-off due to the noise generated by the rocket exhaust. This affects the launch vehicle structure in addition to sensitive payloads and ... -
On Three Dimensional High Lift Flow Computations
(2018-02-18)Computing 3D high lift flows has been a challenge to the CFD community because of three important reasons: complex physics, complex geometries and large computational requirements. In the recent years, considerable progress ... -
Quantum-Continuum Modeling and Simulations of Semiconductor Nanostructures
This thesis proposes a multi-physics model to couple the electrical, mechanical, thermal and quantum mechanical interactions in semiconductor and their heterostructures. Governing differential equations and constitutive ... -
Robust Adaptive Control of a Laser Beam System for Static and Moving Targets
(2018-02-28)The motivation of this thesis is to propose a robust control technique for a laser beam system with target estimation. The laser beam is meant to track and fall on a particular portion of the target until the operation is ... -
The Role of Self-Recirculating Casing Treatment on Axial Compressor and Its Aeroelastic Behavior
The modern-day axial compressor stages in a gas turbine engine play a vital role in generating the high-pressure ratios by operating at the limits of their design. Aerodynamic instabilities such as rotating stall and surge ... -
Shock Tunnel Investigations on Hypersonic Impinging Shock Wave Boundary Layer Interaction
(2018-04-13)The interaction of a shock wave and boundary layer often occurs in high speed flows. For sufficiently strong shock strengths the boundary layer separates, generating shock patterns in the contiguous inviscid flow (termed ... -
Shocks, Shock-Boundary Layer Interaction, And Transonic Flutter
(2017-09-27)Transonic utter is an aeroelastic instability characterized by part-chord shocks over an airfoil and single mode oscillations leading to a drop in the utter boundary. We present a numerical study that examines the influence ... -
Sliding Mode Control Based Guidance Strategies with Terminal Constraints
(2018-07-23)In the guidance literature, minimizing miss distance along with optimizing the energy usage had been an objective for several decades. In current day applications, additional terminal performance such as impact angle and ...