Browsing Interdisciplinary Centre for Energy Research (ICER) by Title
Now showing items 10-23 of 23
-
Experimental and Numerical Studies on High-pressure Trapped Vortex Combustion
Recent climate change issues demand stringent emission standards for natural gas-fired power generation applications. The Trapped Vortex Combustor (TVC) is a relatively new concept where the flame is stabilized using a ... -
Experimental Investigation of Novel High Shear Injector at Elevated Pressure Conditions: Hydrodynamics, Spray and Combustion Characterization
The stringent pollution and emission norms due to the present climate change and global warming have pushed industries to meet these norms and cut down their emission levels. In the same pipeline, the aviation industries ... -
Exploring Soft Matter and Modified-Liquid Electrolytes for Alkali metal (Li, Na) Based Rechargeable Batteries
The current upsurge in demand for high energy density batteries for applications across industries ranging from small scale portable electronics, electric automobiles to storage grids, has led to research in next generation, ... -
Hydrodynamic stability of shear flows : Jet in crossflow, particle laden planar and swirling jets
Jet in crossflow is a flow scenario that involves momentum exchange of a round jet injected into a crossflow. This flow configuration has industrial importance because of its application in gas turbine combustors which ... -
Interaction of PbTe with and its alloys at diffusion bonded interfaces: Temperature dependent evolution of phases and microstructure
The past years have seen an increasing interest in high-efficient thermoelectric materials because of their promising application to harvest the widely distributed waste heat. Realizing high-efficient TE materials into ... -
Internal Boiling to Flame Flickering: Insights into Various Spatio-temporal Dynamics of Nanofuel Droplet Combustion
Addition of metal and metalloid particles (micron and sub-micron) to conventional fuels like Jet-A has been a ‘liquid-fuel extender’ technique i.e. increased specific energy for less amount of liquid fuels. One of the main ... -
Investigations into a novel process for high ash Indian coal gasification- a two-stage gasifier
India, in addressing climate change, has embarked on clean coal initiatives to reduce carbon emissions. Various measures are taken towards meeting the decarbonization process, and coal conversion through gasification is ... -
Liquid jet injection into a supersonic crossflow: Influence of jet orifice shape on penetration and atomization
Liquid jet injection into supersonic crossflow is one of the conceptually simple ways of fuel atomization in SCRAMJET engines. The success of these engines demands the efficient mixing of incoming supersonic air and the ... -
A New Class of Single DC-link Fed Multilevel Inverter Topologies for Grid Connected Photovoltaic Systems with Reduced Component Count and Inherent Capacitor Balancing
Grid integration of photovoltaic (PV) energy sources has been mostly governed by conventional two-level voltage source inverters. These topologies have significant switching power losses, dV/dt stress and THD level at lower ... -
On understanding the role of V addition in design and development of high specific strength γ'(L12)-strengthened Co-base superalloys
Ni-based superalloys with excellent mechanical, thermal and oxidation resistance properties have great demand in energy applications. Over the time, varied compositions of Ni-based superalloys have been utilized for the ... -
Studies on Mixing Characteristics in the Critical Flow Regime of Supersonic Ejectors
Ejectors are passive devices having ubiquitous applications in several engineering domains, including modern-day applications in supercritical CO2-based power and refrigeration cycles. The ejector compresses a low-enthalpy ... -
Studies on Pressurized Solar Thermal Receiver and Thermal Energy Storage System
High-efficiency power cycles for concentrating solar power (CSP) technology such as air or supercritical carbon-dioxide (s-CO2) based Brayton cycle require high-pressure high-temperature conditions at the gas turbine ... -
Studies on Rotary Atomization
In rotary fuel injection systems, the fuel is atomized with the help of centrifugal force provided by the rotation of the injector. The rotational power can be directly provided by the shaft of a gas turbine, which can go ... -
Unravelling the composition space of Zr2FeNiSb2 double half-Heusler thermoelectric material
More than half of annual energy consumption in thermal power plants are released in the form of waste heat. However, this waste heat could be harnessed with the help of thermoelectric (TE) devices which can convert this ...