Search
Now showing items 151-160 of 174
Role Of Interfacial Phenomena In Bioprocessing Of Minerals Using Bacillus Polymyxa
(Indian Institute of Science, 2006-12-11)
In recent years there has been growing interest in bio-mineral processing due to its low operating costs and its application in processing lean-grade ores. Bioprocessing is a good alternative to conventional hydrometallurgy ...
Modeling Constitutive Behavior And Hot Rolling Of Steels
(Indian Institute of Science, 2006-03-17)
Constitutive behavior models for steels are typically semi-empirical, however recently neural network is also being used. Existing neural network models are highly complex with a large network structure i.e. the number ...
Studies On Acid Production Potential Of Some Sulphide Minerals And Bioremediation Of Acid Mine Drainage
(2009-08-19)
Acid mine drainage (AMD) is a worldwide environmental problem associated with the mining wastes, generated from active and inactive mining sites from mineral processing activities. AMD is defined as the drainage that occurs ...
Kinetics Of Pressureless Infiltration Of Al-Mg Alloys Into Al2O3 Preforms : A Non-Uniform Capillary Model
(2009-03-06)
Al-Mg alloys spontaneously infiltrate into porous ceramic preform in a nitrogenous
atmosphere above 750 °C with Mg either pre-alloyed or introduced at the interface to
initiate the process. The governing process variables ...
Superplastic Deformation Behaviour Of AZ31 Magnesium Alloy
(2009-05-29)
Superplastic deformation behaviour of AZ31 magnesium alloy having initial grain sizes 8, 11 and 17μm alloy was investigated at 673 K with initial strain rates ranging from 1x10-2 to 1x10-4 s-1. Mechanical data on fine ...
Ion-Nitriding Of Maraging Steel (MDN 250A Grade) For Light Combat Aircraft Applications
(2009-05-12)
Maraging steels have got high strength and good toughness. Maraging steel MDN 250A grade is used for slat tracks on the leading edge of the wing of Light Combat Aircraft (LCA). This application requires high strength and ...
Study Of Fracture Properties Of NiAl Bond Coats On Nickel Superalloy By Three Point Bending Of Microbeams
(2009-05-13)
The continuing quest for higher performance levels of modern gas turbine engines has been accompanied by the demand for higher engine operating temperatures. The use of Thermal Barrier Coatings (TBCs) enabled gas turbines ...
Processing And Characterisation Of Bulk Al2 O3 p /AIN-Al Composites By Pressureless Infiltration
(Indian Institute of Science, 2005-12-22)
Al-Mg alloys were infiltrated into porous alumina preforms at temperatures greater than 950°C where significant amount of nitride forms in the matrix. The present work aims to obtain a process window for growing A1N rich ...
Studies On The Bioremoval Of Hexavalent And Trivalent Chromium Using Bacillus Polymyxa
(Indian Institute of Science, 2007-06-07)
The removal of toxic and heavy metal contaminants from aqueous waste streams and industrial effluents is one of the most important environmental issues being faced the world over. In order to combat this problem, the ...
Modeling Of Liquid Flow In A Packed Bed Under Influence Of Gas Flow
(2009-03-05)
The aim of the current study is to model (non-wetting) liquid flow in a packed bed under the influence of gas flow. It has been observed experimentally that non-wetting liquid flows in a packed bed in form of small droplets ...