Show simple item record

dc.contributor.advisorSambandan, Sanjiv
dc.contributor.advisorGunasekhar, K R
dc.contributor.authorSaravanavel, Ganapathy
dc.date.accessioned2021-03-29T04:26:08Z
dc.date.available2021-03-29T04:26:08Z
dc.date.submitted2020
dc.identifier.urihttps://etd.iisc.ac.in/handle/2005/5009
dc.description.abstractThe recent years have seen the development biocompatible ingestible and implantable devices for human health monitoring. The major issue is the toxicity of the organic materials (polymers) used in the implants and consequently the need for second surgery to remove the electronic implants. This, in turn, shows the significance and the need for electronic materials which is edible in nature. The key challenge in the use of edible materials as the substrate lies in the requirements for robust chemical resistance, vacuum compatibility and temperature stability to accommodate different fabrication processes such as spin coating, photolithography, and etching processes because, during the fabrication processes, the substrate needs to be exposed to high temperatures or harsh chemical solvents. This necessitates research in the direction of exploring new food and food-based substrates for electronics which would be assimilated by the human body. Motivated by these existing problems, the thesis discusses the different forms of sugar, (Isomalt, sugar paper and sugarin) and the method to fabricate basic electronic passive and active components, and functional devices for wireless transmission. The main objective of the thesis is to develop food-based substrates, its characterization, building active and passive components and its demonstration. To incorporate these materials into electronics, the morphology, electrical, mechanical, and optical properties were extensively studied. The thesis discusses three modules of inductor design based on isomalt- sugarin, edible capacitor and its corresponding LC circuits have been discussed and the results compared. The demonstration of the relay on 2D substrates is done successfully. The thesis then explores the development and characterization of TFTs on sugar paper. Despite successful demonstrations, there exist certain limitations in the fabrication of TFTs using sugar based substrates. The thesis finally outlines these limitations and suggests methods to overcome these.en_US
dc.description.sponsorshipen_US
dc.language.isoen_USen_US
dc.relation.ispartofseries
dc.rightsI grant Indian Institute of Science the right to archive and to make available my thesis or dissertation in whole or in part in all forms of media, now hereafter known. I retain all proprietary rights, such as patent rights. I also retain the right to use in future works (such as articles or books) all or part of this thesis or dissertationen_US
dc.subjectThin filmsen_US
dc.subjectEdible Electronics
dc.subjectVacuum Technology
dc.subjectOscillator
dc.subjectTFTS
dc.subject.classificationEdible Electronicsen_US
dc.titleThin Film Electronics on Edible Substratesen_US
dc.typeThesisen_US
dc.degree.namePhDen_US
dc.degree.levelDoctoralen_US
dc.degree.grantorIndian Institute of Scienceen_US
dc.degree.disciplineEngineeringen_US


Files in this item

This item appears in the following Collection(s)

Show simple item record