Browsing Instrumentation and Applied Physics (IAP) by Title
Now showing items 28-47 of 216
-
Design of a Vortex Tube based Refrigeration System
(2018-03-15)Vortex tube (VT) is a mechanical device with no moving parts. The fundamental principle of Vortex Tube is that it can split an incoming fluid flow of a constant pressure and constant temperature gas stream into two separate ... -
Design, Development and Characterisation of piezoelectric microvalve for electric propulsion system
The advanced geostationary communication satellites have shown trends in terms of increased power, life and payload mass. For these platforms, Electric Propulsion Systems (EPS) offer an attractive option for overall mass ... -
Design, Development and Performance Analysis of Micromachined Sensors for Pressure and Flow Measurement
(2018-02-18)Now-a-days sensors are not limited only to industry or research laboratories but have come to common man’s usage. From kids toys to house hold equipment like washing machine, microwave oven as well as in automobiles, a ... -
Design, Development and Performance Study of Microneedle & Micropump-based Transdermal Drug Delivery System
Transdermal drug delivery is the most preferred drug delivery method, due to its high efficiency and less side effects. In conventional transdermal drug delivery, the delivery of macromolecular drugs (ex: Insulin, vaccines ... -
Design, Development and Validation of Fiber Bragg Grating Sensor Based Devices for Detecting Certain Healthcare Parameters
(2018-01-30)Several sensor technologies have been developed and experimented over the last few decades to cater various needs of medical diagnostics. Among these, fiber optic sensors, in particular, Fiber Bragg Grating (FBG) based ... -
Design, Development and Validation of High Performance Fiber Bragg Grating Accelerometers
Fiber Bragg grating (FBG) accelerometers have attracted the attention of researchers as an efficient and attractive alternative to conventional electrical accelerometers. They exploit the remarkable sensing capabilities ... -
Design, Fabrication and Characterization of Metal Oxide Semiconductor Based MEMS Gas Sensors for Carbon Monoxide Detection
In recent years, intense efforts have been made towards the development of miniaturized gas-sensing devices for hazardous gas detection. Carbon monoxide, which is a result of incomplete combustion, is a colourless, odourless, ... -
Design, Fabrication and Development of Polymer Microcantilever for Flow Rate Measurement and Thermal Actuation
Design, fabrication and development of polymer microcantilever for flow rate measurement and thermal actuation Research Supervisors: Prof. K. Rajanna and Dr. G. R. Jayanth Microcantilevers are sensitive micromechanical ... -
Design, Fabrication And Testing Of A Versatile And Low-Cost Diffuse Optical Tomographic Imaging System
(2009-06-16)This thesis reports the work done towards design and fabrication of a versatile and low cost, frequency domain DOT (Diffuse Optical Tomography) Imager. A design which uses only a single fiber for the source and a single ... -
Development and Application of Fiber Optic Sensors for Structural and Flight Testing of Aircraft
Structural testing deals with sensing of health parameters such as strain, temperature, vibration, etc. of different structures like aircrafts, ships, bridges, dams, buildings, etc. and it is important from the viewpoint ... -
Development And Performance Study Of Nanostructured Metal Oxide Gas Sensor
(2015-01-07)The basic necessities to sustain life are – air, water and food. Although the harmful effects due to contaminated food or water are dangerous to life, these can be reduced/avoided by controlling the intake. Whereas, in ... -
Development and Performance Study of Thick Gas Electron Multiplier (THGEM) Based Radiation Detector
(2018-04-23)Radiations can be classified as either ionizing or non-ionizing according to whether it ionizes or does not ionize the medium through which they propagate. X-rays photons and gamma rays are the typical examples of ionizing ... -
Development Of A Tin Oxide Based Thermoelectric Gas Sensor For Volatile Organic Compounds
(2009-09-22)Today there is a great deal of interest in the development of gas sensors for applications like air pollution monitoring, indoor environment control, detection of harmful gases in mines etc. Based on different sensing ... -
Development of an Automated Test & Parameter Extraction Tool for Active Matrix Displays
Active matrix backplanes used in at panel displays are prone to line faults (opens and shorts) and pixel faults (poor transistor performance and parameter variations). These faults could occur during fabrication or ... -
Development of Cryocooler Based High Performance Cryosorption Pump
The aim of this work is to develop high performance cryosorption (or cryoadsorption) pumps specifically for fusion applications. An actual cryopump for the above application will use the supercritical liquid helium flow ... -
Development Of Cu2ZnSnS4/ZnS Thin Film Heterojunction Solar Cells By Ultrasonic Spray Pyrolysis
(2013-06-06)Semiconductors such as CuInGaSe2 and CdTe have been investigated as absorber layer materials for thin film solar cells since their band gap matches with the solar spectrum. Films as thin as 2m are sufficient for the ... -
Development Of Deterministic And Stochastic Algorithms For Inverse Problems Of Optical Tomography
(2017-04-27)Stable and computationally efficient reconstruction methodologies are developed to solve two important medical imaging problems which use near-infrared (NIR) light as the source of interrogation, namely, diffuse optical ...