Parameter estimation and signal detection are the two key components of a wireless communication system. They directly impact the bit-error-ratio (BER) performance of the system. Several criteria have been successfully ...

Fusion frames and block sparse recovery are of interest in signal processing and communication applications. In these applications it is required that the fusion frame have some desirable properties. One such requirement ...

In system identification scenario, the linear approximation of the system modelled by its impulse response, is estimated in real time by gradient type Least Mean Square (LMS) or Recursive Least Squares (RLS) algorithms. ...

TO achieve high level of integration in order to reduce cost, heterodyne architecture has made way for low-IF and zero-IF (direct conversion) receiver architectures. However, a very serious issue in implementing both zero ...

There is an ever increasing demand for higher spectral usage in wireless communication, radar and imaging systems. Higher spectral efficiency can be achieved using components that are aware of system environment and adapt ...

Every auditory event provides an information-rich signal to the brain. The signal constitutes perceptual attributes of pitch, loudness, timbre, and also, conceptual attributes like location, emotions, meaning, etc. In the ...

For time-varying signals such as speech and audio, short-time analysis becomes necessary to compute specific signal attributes and to keep track of their evolution. The standard technique is the short-time Fourier transform ...

Frequency-domain scheduling, multiple antenna techniques, and rate adaptation enable next generation orthogonal frequency division multiple access (OFDMA) cellular systems such as Long Term Evolution (LTE) to achieve ...