Browsing Mechanical Engineering (ME) by Advisor "Kailas, Satish V"
Now showing items 1-14 of 14
-
Design and development of lateral force-controlled tribosystems
In a tribo-system, the frictional resistance during a sliding process depends on several parameters. These parameters include the interacting materials, their surface topography, contact conditions such as normal load, ... -
Development of Microstructure, Texture and Residual Stresses during Friction Stir Processing of Aluminium Alloys
Friction Stir Processing (FSP) is emerging as one of the most competent Severe Plastic Deformation (SPD) methods for producing bulk ultra-fine grained materials with improved properties. The significant advantage of FSP ... -
Estimation and Control of Friction in Bulk Plastic Deformation Process
Friction plays a significant role in bulk plastic deformation processes in controlling the tool life, formability of the work piece material and the quality of the finished product such as, surface finish, microstructure ... -
In-Situ Polymer Derived Nano Particle Metal Matrix Composites Developed by Friction Stir Processing
(2018-08-10)Ceramic metal matrix composites (CMMCs) are materials generally created by mixing of hard ceramic particles in a metal matrix. They were expected to combine the ductility and toughness of the metal with the high strength ... -
Influence of Surface Topography and Roughness on Lubrication, Friction and Scuffing in High Hardness Steels
In tribology engineering, friction control is a significant challenge. The interacting surfaces of mechanical components are typically designed for best efficiency during tribological operations and are primarily achieved ... -
Influence of surface topography on wear and debris morphology of polymers
The artificial knee and hip joints comprise a polymer-metal tribological system where soft polymers slide against hard metallic surfaces. When a polymer slides on it, the micro hard asperities remove the polymers in the ... -
Measurement And Analysis Of Friction Induced By A Cutting Operation Lubricated By Oil In Water Emulsion
(2013-09-05)The lubricants that are applied during metal cutting acts on the interface between the tool and the nascent surfaces generated by the cutting process. Dispersions of oil in water made using suitable emulsifier(s) are used ... -
Mechanics and Mechanisams in Fretting Damage for Stainless Steel and Chromium Carbide Coatings
(2018-04-11)Fretting is a serious concern in many industrial components, specifically, in nuclear industry for the safe and reliable operation of the component/system. Till date, a lot of efforts has already been made to understand ... -
Microstructure, mechanical behavior, and thermal stability of in-situ polymer-derived ceramic reinforced Al-based composites
Al-based metal matrix composites (MMCs) show a high strength-to-weight ratio which makes them attractive for the aerospace and automobile industries. The reinforcements for the same have conventionally been micron-sized ... -
New Mechanical Methods to Join Sheets in Lap and Butt Configuration and Analytical Model to Predict and Improve Clinching Joint Strength
Mechanical joining of sheets has many advantages over other joining methods in terms of wide variety combination of similar, dissimilar and non-metallic material sheet joining. In conventional SPR joining, the rivet and ... -
Studies on Friction Stir Welding of Aluminium AA2024 Alloy to Pure Copper
Aluminium-copper joints are widely used in electrical applications due to their unique properties. However, joining of these metals by conventional welding techniques is restricted due to the formation of brittle (bulk ... -
Studies On Friction Stir Welding Of Precipitation Hardenable Aluminium Alloys
(2010-06-10)Friction Stir Welding (FSW) is an emerging solid state welding process. It has been a proven method for welding high strength aluminium alloys which were previously not recommended for conventional fusion welding. Since ... -
Studies on the Effect of Process Aspects on Material Mixing and Defect Formation in Friction Stir Welding
(2018-05-30)Friction Stir Welding (FSW) is a rapidly growing solid state welding process and has been a proven method for welding high strength aluminium alloys which were formerly not recommended for joining by conventional fusion ... -
Transfer Layer Formation And Friction In Extrusion Of Aluminum : An Experimental Study Using A High Temperature Vacuum Based Pin-On-Disc Machine
(2010-09-21)Hot extrusion of aluminum is widely practiced in industries for economic production of structural components. The surface finish and tolerance of the extruded components, both from design and aesthetic requirement, are ...