Search
Now showing items 1-6 of 6
Microstructure And Mechanical Properties Of Consolidated Magnesium Chips
(2013-04-04)
Development of sustainable manufacturing and conservation of primary materials are the key challenges to environmental degradation and climate change. Recycling of primary materials is one of the approaches suggested for ...
Development Of Cast Magnesium Alloys With Improved Strength
(2014-05-15)
Aim of the present work was to explore the possibility of improving strength of cast Mg by alloying additions, viz., Si and Zn+Al. All the alloys were produced by squeeze casting technique using squeeze pressure of 12MPa ...
Corrosion And Wear Behaviour of Plasma Electrolytic Oxidation And Laser Surface Alloy Coatings Produced on Mg Alloys
(2017-10-11)
In the present investigation, surface coatings employing laser surface alloying (LSA) and plasma electrolytic oxidation (PEO) processes have been prepared on Mg alloys. The coatings have been investigated for corrosion and ...
Effect of Li Addition on the Plasticity of AZ31 Mg-Alloy
(2017-11-14)
Mg-alloys, despite being the lightest structural metallic materials, find limited applications due to their poor workability, which is due to the hcp structure that does not provide sufficient number of independent slip ...
Creep, Wear And Corrosion Behaviour Of Novel Magnesium Alloys And Composites
(2011-04-01)
In the present investigation, MMCs have been fabricated using the creep-resistant AE42 magnesium alloy as matrix and reinforcing it with saffil short fibres (essentially δ-Al2O2) and SiC particles in various combinations. ...
Evolution Of Texture And MIcrostructure During Processing Of Pure Magnesium And The Magnesium Alloy AM30
(2011-07-01)
Magnesium is the lightest metal that can be used for structural applications. For the reasons of weight saving, there has been an increasing demand for magnesium from the automotive industry. However, poor formability at ...