Search
Now showing items 21-30 of 99
High-Throughput Bending Tests for Investigating Creep Behavior Affected by Structural and Microstructural Inhomogeneities
The bending of cantilevers is an alternate technique for the extraction of power-law creep parameters of materials. It has been shown earlier that in homogeneous systems showing tension-compression symmetry, digital image ...
Microstructure-Corrosion Property Correlation in Electrodeposited Sn and Cu Based Coating Systems
Conventional metallic coatings are widely used for protection against corrosion. This study investigates the correlation between microstructure and corrosion properties in SnCr and CuCr electrodeposited coatings. The wide ...
Engineering Interpenetrating Polymeric Network (IPN) Membranes for Effective Water Remediation
Water is fundamental to human life, sustaining ecosystems, supporting livelihoods, and underpinning human well-being. Despite its importance, water scarcity is a growing global issue due to population growth, economic ...
Hexagonal boron nitride incorporated polymer nanocomposites for water remediation
The isolation of graphene in 2004 sparked a revolution in the study and applications of 2D
nanomaterials in various disparate fields. Separation technology is no exception. 2D nanomaterials
possess numerous desirable ...
Correlation Between Microstructure and Corrosion Properties of Electrodeposited Nickel and Zinc Based Coatings
Conventional metallic coatings such as Ni and Zn are extensively used in corrosion protection applications. In most studies on the corrosion behavior of metallic coatings, the emphasis is on correlating morphology and ...
Inkjet-printed high performance oxide electronics and its application at sensor interfaces
Over the last two decades, printing of oxide semiconductors has received special attention due to its advantages such as low processing temperature, even at room temperature; high electron mobility; good transparency due ...
Microstructure – texture - mechanical property correlation in additively manufactured stainless Steel 316L and Cu-Ni-Sn
Metal additive manufacturing (AM) has gained considerable interest in recent years because of its ability of near net shape building of the components, one-go production, ability to make intricate designs and minimized ...
Potential Applications of Snail Mucus in Cartilage Repair and Fabrication of Porous 3D Scaffolds
Articular cartilage damage is a major challenge in orthopedics. This medical condition is exacerbated by the cartilage's inability to self-repair due to the non-vascularization of the tissue and many other factors. Several ...
Studying the effect of Re on the Co-Ni-Al-Ti-Nb-Cr superalloy’s coarsening kinetics and establishing the high-throughput diffusion couple approach for alloy design
The studies are conducted to understand the effect of Re addition on microstructural evolution and coarsening kinetics of new Co-Ni-Al-Ti-Nb-Cr based superalloys. Lattice misfit is reduced by adding Re, confirmed from ...
The role of polymer phase on rigidity percolation of ABS−spherical nickel microparticles composites
Percolation and rigidity transitions are very important phenomena in random heterogeneous microstructures, as various physical properties change abruptly at some critical volume fractions of one phase. The concepts of ...