Browsing Materials Engineering (MatEng) by thesis submitted date"2017"
Now showing items 1-12 of 12
-
Atomistic Simulation of Grain Boundary Effects on Cascade Damage in Vanadium
Advancements in fusion reactor technology has led to the construction of ITER and the realisation of fusion energy is closer than ever before. However, realisation of fusion energy critically depends upon breakthrough in ... -
Diffusion-Controlled Growth of Phases in Metal-Tin Systems Related to Microelectronics Packaging
(2018-08-28)The electro–mechanical connection between under bump metallization (UBM) and solder in flip–chip bonding is achieved by the formation of brittle intermetallic compounds (IMCs) during the soldering process. These IMCs ... -
Effect of Humidity and Temperature on Wear of TiN and TiAIN Coatings
(2018-05-30)When loss of material due to sliding of two solids is promoted/prevented, in the presence of chemically reacting liquid or gas, tribochemical wear is said to occur. Tribochemical wear, in which corrosive media promotes ... -
Evolution of Microstructure and Texture in Manganese Steels
Twinning Induced Plasticity (TWIP) and Transformation Induced Plasticity (TRIP) steels possess excellent combination of high strength and high ductility. Deformation twinning and strain induced martensitic phase transformation ... -
Insights into the Influence of Electric Field on the Structural Evolution and its Correlation with the Properties in the Lead-based BiScO3-PbTiO3 and the Lead-free Na0.5Bi0.5TiO3 based Piezoceramics
Advanced piezoelectric ceramics are widely used as piezoelectric sensors, transducers, actuators, etc. Among the commercially viable piezoelectric systems, lead zirconate titanate, PbZr1-XTiXO3 (PZT) has dominated the ... -
Mechanical and Corrosion Properties of Selective Laser Melted Alloys
(2018-05-23)Selective laser melting (SLM) of metallic powders is an additive manufacturing technique that is widely employed to produce 3D components, and is fast becoming an important method for manufacturing near-net shape and complex ... -
Novel Phenomena Associated With Giant Tetragonality in the Ferroelectric BiFeO3-PbTiO3 System
The multiferroic perovskite solid solution xBiFeO3-(1-x)PbTiO3 (BF-PT) exhibits very unique features such as giant tetragonality (c/a ~ 1.19), coexistence of ferroelectric and magnetic order (in certain composition range) ... -
Organic-Inorganic Hybrid Photovoltaics : Interface Engineering, Fabrication and Characterization
In the past few decades the field of organic electronics particularly organics photovoltaic (OPVs) find wide interest among researchers. It finds many advantages such as light weight, low temperature fabrication requirements, ... -
Planar Fault Energies in L12 Compounds
High temperature metallic structural materials, such as Ni-base superalloys owe their strength to a two-phase microstructure consisting of an fcc matrix strengthened by intermetallic A3B type precipitates. The performance ... -
Precipitate Growth and Coarsening in Ternary Alloys
(2018-08-20)We have studied precipitate growth and coarsening in ternary alloys using two different phase held models. The first one is a ternary extension of the classical Cahn-Hilliard (C-H) model in which both the phases are ... -
TEM Characterization of Microstructural Evolution of GaN Grown by MOCVD on c-Sapphire
III-Nitrides (AlN, GaN, InN) find use in the high-power high frequency applications. Bulk GaN substrates are difficult to grow, therefore the GaN based structures must be grown on foreign substrates. In this thesis, ... -
Testing Methodologies for Probing Site Specific Fatigue Response of Graded Coatings
Thermal barrier coating systems (TBC’s) employed in the high pressure turbine section of a modern aero-turbine engine serve as an example of constrained material systems used for engineering applications. TBC’s today are ...