Browsing Materials Engineering (MatEng) by Title
Now showing items 38-57 of 311
-
Development Of Cast Magnesium Alloys With Improved Strength
(2014-05-15)Aim of the present work was to explore the possibility of improving strength of cast Mg by alloying additions, viz., Si and Zn+Al. All the alloys were produced by squeeze casting technique using squeeze pressure of 12MPa ... -
Development of Corrosion Protective Coating Systems for AZ31B Magnesium Alloy
(2018-07-05)Magnesium and its alloys are extensively used for various industries such as aerospace, automobile and electronics due to their excellent properties such as low density, high strength and stiffness and electromagnetic ... -
Development of High Temperature Aluminium Alloys through Microstructure Control
(2018-07-27)A large number of advanced structural materials are based on metallic materials where alloying additions play a key role in imparting the required properties. Most of the commercially important aluminium alloys are classified ... -
Development of Hybrid Organic/Inorganic Composites as a Barrier Material for Organic Electronics
(2018-04-16)The ultra high barrier films for packaging find applications in a wide variety of areas where moisture and oxygen barrier is required for improved shelf-life of food/beverage products and for microbial free pharmaceutical ... -
Development of New High Strength Alloy in Cu-Fe-Si System through Rapid Solidification
(2018-02-21)Copper based alloys play important role in high heat flux applications, particularly in rocket technology, the liner of the combustion chamber, and also in other heat transfer vessels. In these applications, one needs ... -
Development of wrought Mg-Li based alloys with improved strength and ductility
A comprehensive investigation has been undertaken to develop cold rolled Mg-Li based alloys with tensile properties superior to the existing commercial or experimental Mg-Li based alloys. In this endeavor, melting and ... -
Diffusion Controlled Growth of A15-Based Nb3Sn and V3Ga Intermetallic Compounds
(2018-08-09)The A15-based Nb3Sn and V3Ga superconducting compounds are an integral part of synchrotrons and magnetic fusion reactor technology, especially where a magnetic field higher than 10 T is required, which lies beyond the limit ... -
Diffusion Studies On Systems Related to Nickel Based Superalloys
(2013-02-28)Superalloys offer high temperature strength, excellent creep, corrosion and oxidation resistances, microstructural stability and good fatigue life at elevated temperatures. The composition of the superalloys has been ... -
Diffusion-Controlled Growth of Phases in Metal-Tin Systems Related to Microelectronics Packaging
(2018-08-28)The electro–mechanical connection between under bump metallization (UBM) and solder in flip–chip bonding is achieved by the formation of brittle intermetallic compounds (IMCs) during the soldering process. These IMCs ... -
Dry Sliding Wear of Saffil Short Fibre Reinforced AZ91D Mg Alloy Composite
(2018-03-01)Magnesium alloys have emerged as a promising material for light-weighting due to their potential for higher weight saving compared with advanced high-strength steel, aluminium alloys and glass fibre reinforced polymer ... -
Dynamic Strain Aging and Creep in near-α Ti Alloy, IMI834
IMI 834 is a near- Ti alloy used in high temperature applications such as compressor discs and blades of aero engines. Titanium alloys including IMI 834 are known to exhibit dynamic strain aging (DSA) over the temperature ... -
Effect Of Atomic Mobility In The Precipitate Phase On Coarsening : A Phase Field Study
(2010-10-28)In this thesis, we have used a phase field model for studying the effect of atomic mobility inside the precipitate phase on coarsening behaviour in two dimensional (2D) systems. In all the available coarsening theories, ... -
Effect of Cobalt Content on Microstructure and Strength in Severely Cold Drawn Ni-Co wires
The future upcoming technologies in aerospace, transport and nuclear industries demand materials with superior mechanical properties that are also economically viable. The quest to achieve theoretical strength of material ... -
Effect of Copper on Strength of Super 304H Austenitic Stainless Steel
Super 304H is a copper-containing austenitic stainless steel with potential applications in advanced thermal power plants owing to its superior corrosion, oxidation, creep resistances and cost affordability. The addition ... -
Effect of Electric Current Pulses on Pre-cracked Thin Metallic Conductors: From Crack Propagation to Healing of Cracks
Both scientifically and technologically, it is important to investigate the effects of electric current on the structural integrity of metallic components. As an electric current reverses its direction across a crack, ... -
Effect Of Free-Volume On The Fracture And Fatigue Of Amorphous Alloys
(2010-07-01)Bulk metallic glasses (BMGs) are a new class of structural materials and exhibit unique combinations of mechanical properties. As a result, their mechanical behavior has been an active area of scientific pursuit in the ... -
Effect of Heat Treatment and Modification on Flow and Fracture Behaviour of a Newly Developed Al-Si Based Cast Alloy
(2018-04-17)The compression behavior of a newly developed near eutectic Al-Si based cast alloy with three different microstructures has been investigated in the present work. Microstructures with modified and unmodified Si particles ... -
Effect of High Pressure Torsion Processing on Precipitate Containing Alloys
Severe plastic deformation (SPD) processes yield excellent grain refinement in metallic materials by application of very large shear strains while retaining the initial sample dimensions. Its effects on simultaneously ...