Show simple item record

dc.contributor.advisorKrupanidhi, S B
dc.contributor.authorMukundan, Shruti
dc.date.accessioned2018-08-09T11:55:21Z
dc.date.accessioned2018-08-28T09:09:05Z
dc.date.available2018-08-09T11:55:21Z
dc.date.available2018-08-28T09:09:05Z
dc.date.issued2018-08-09
dc.date.submitted2015
dc.identifier.urihttps://etd.iisc.ac.in/handle/2005/3930
dc.identifier.abstracthttp://etd.iisc.ac.in/static/etd/abstracts/4808/G27204-Abs.pdfen_US
dc.description.abstractThe popularity of III-nitride materials has taken up the semiconductor industry to newer applications because of their remarkable properties. In addition to having a direct and wide band gap of 3.4 eV, a very fascinating property of GaN is the band gap tuning from 0.7 to 6.2 eV by alloying with Al or In. The most common orientation to grow optoelectronic devices out of these materials are the polar c-plane which are strongly affected by the intrinsic spontaneous and piezoelectric polarization fields. Devices grown in no polar orientation such as (1 0 –1 0) m-plane or (1 1 –2 0) a-plane have no polarization in the growth direction and are receiving a lot of focus due to enhanced behaviour. The first part of this thesis deals with the development of non-polar epimGaN films of usable quality, on an m-plane sapphire by plasma assisted molecular beam epitaxy. Growth conditions such as growth temperature and Ga/N flux ratio were tuned to obtain a reasonably good crystalline quality film. MSM photodetectors were fabricated from (1 0 -1 0) m-GaN, (1 1 -2 0) a-GaN and semipolar (1 1 -2 2) GaN films and were compared with the polar (0 0 0 2) c-GaN epilayer. Later part of the thesis investigated (1 0 -1 0) InN/ (1 0 -1 0) GaN heterostructures. Further, we could successfully grow single composition nonpolar a-plane InxGa1-xN epilayers on (1 1 -2 0) GaN / (1 -1 0 2) sapphire substrate. This thesis focuses on the growth and characterisation of nonpolar GaN, InxGa1-xN and InN by plasma assisted molecular beam epitaxy and on their photodetection potential. Chapter 1 explains the motivation of this thesis work with an introduction to the III-nitride material and the choice of the substrate made. Polarization effect in the polar, nonpolar and semipolar oriented growth is discussed. Fabrication of semiconductor photodetectors and its principle is explained in details. Chapter 2 discusses the various experimental tools used for the growth and characterisation of the film. Molecular beam epitaxy technique is elaborately explained along with details of the calibration for the BEP of various effusion cells along with growth temperature at the substrate. Chapter 3 discusses the consequence of nitridation on bare m-sapphire substrate. Impact of nitridation step prior to the growth of GaN film over (1 0 -1 0) m-sapphire substrate was also studied. The films grown on the nitridated surface resulted in a nonpolar (1 0 -1 0) orientation while without nitridation caused a semipolar (1 1 -2 2) orientation. Room temperature photoluminescence study showed that nonpolar GaN films have higher value of compressive strain as compared to semipolar GaN films, which was further confirmed by room temperature Raman spectroscopy. The room temperature UV photodetection of both films was investigated by measuring the I-V characteristics under UV light illumination. UV photodetectors fabricated on nonpolar GaN showed better characteristics, including higher external quantum efficiency, compared to photodetectors fabricated on semipolar GaN. Chapter 4 focuses on the optimization and characterisation of nonpolar (1 0 -1 0) m-GaN on m-sapphire by molecular beam epitaxy. A brief introduction to the challenges in growing a pure single phase nonpolar (1 0 -1 0) GaN on (1 0 -1 0) sapphire without any other semipolar GaN growth is followed by our results achieving the same. Effect of the growth temperature and Ga/N ratio on the structural and optical properties of m-GaN epilayers was studied and the best condition was obtained for the growth temperature of 7600C and nitrogen flow of 1 sccm. Strain in the film was quantitatively measured using Raman spectroscopy and qualitatively analyzed by RSM. Au/ nonpolar GaN schottky diode was fabricated and temperature dependent I-V characteristics showed rectifying nature. Chapter 5 demonstrates the growth of (1 0 -1 0) m-InN / (1 0 -1 0) m-GaN / (1 0 -1 0) m-sapphire substrate. Nonpolar InN layer was grown at growth temperature ranging from 3900C to 440C to obtain a good quality film at 4000C. An in-plane relationship was established for the hetrostructures using phi-scan and a perfect alignment was found for the epilayers. RSM images on the asymmetric plane revealed highly strained layers. InN band gap was found to be around 0.8 eV from absorption spectra. The valance band offset value is calculated to be 0.93 eV for nonpolar m-plane InN/GaN heterojunctions. The heterojunctions form in the type-I straddling configuration with a conduction band offsets of 1.82 eV. Chapter 6 focuses on the optimization of nonpolar (1 1 -2 0) a-GaN on (1 -1 0 2) r-sapphire by molecular beam epitaxy. Effect of the growth temperature and Ga/N ratio on the structural and optical properties of a-GaN epilayers was studied and the best condition was obtained for the growth temperature of 7600C and nitrogen flow of 1 sccm. An in-plane orientation relationship is found to be [0 0 0 1] GaN || [-1 1 0 1] sapphire and [-1 1 0 0] GaN || [1 1 -2 0] sapphire for nonpolar GaN on r-sapphire substrate. Strain in the film was quantitatively measured using Raman spectroscopy and qualitatively analyzed by RSM. UV photo response of a-GaN film was measured after fabricating an MSM structure over the film with Au. EQE of the photodetectors fabricated in the (0 0 0 2) polar and (1 1 -2 0) nonpolar growth directions were compared in terms of responsively, nonpolar a-GaN showed the best sensitivity at the cost of comparatively slow response time. Chapter 7 demonstrates the growth of non-polar (1 1 -2 0) a-plane InGaN epilayers on a-plane (1 1 -2 0) GaN/ (1 -1 0 2) r-plane sapphire substrate using PAMBE. The high resolution X-ray diffraction (HRXRD) studies confirmed the orientation of the films and the compositions to be In0.19Ga0.81N, In0.21Ga0.79N and In0.23Ga0.77N. The compositions of the films were controlled by the growth parameters such as growth temperature and indium flux. Effect of variation of Indium composition on the strain of the epilayers was analyzed from the asymmetric RSM images. Further, we report the growth of self-assembled non-polar high indium clusters of In0.55Ga0.45N over non-polar (1 1 -2 0) a-plane In0.17Ga0.83N epilayer grown on a-plane (1 1 -2 0) GaN / (1 -1 0 2) r-plane sapphire substrate. The structure hence grown when investigated for photo-detecting properties, showed sensitivity to both infrared and ultraviolet radiations due to the different composition of InGaN region. Chapter 8 concludes with the summary of present investigations and the scope for future work.en_US
dc.language.isoen_USen_US
dc.relation.ispartofseriesG27204en_US
dc.subjectMolecular Beam Epitaxy Plasmaen_US
dc.subjectNitride Materialsen_US
dc.subjectm-Sapphireen_US
dc.subjectIII-nitride Epitaxyen_US
dc.subjectGaNen_US
dc.subjectMolecular Beam Epitaxyen_US
dc.subjectIndium Nitride (InN)en_US
dc.subjectInGaNen_US
dc.subjectInGaN/GaN Heterostructuresen_US
dc.subjectr-Sapphireen_US
dc.subjectm-plane Sapphireen_US
dc.subject.classificationMaterials Scienceen_US
dc.titleEpitaxial Nonpolar III-Nitrides by Plasma-Assisted Molecular Beam Epitaxyen_US
dc.typeThesisen_US
dc.degree.namePhDen_US
dc.degree.levelDoctoralen_US
dc.degree.disciplineFaculty of Scienceen_US


Files in this item

This item appears in the following Collection(s)

Show simple item record