Search
Now showing items 1-7 of 7
Microstructure And Mechanical Properties Of Consolidated Magnesium Chips
(2013-04-04)
Development of sustainable manufacturing and conservation of primary materials are the key challenges to environmental degradation and climate change. Recycling of primary materials is one of the approaches suggested for ...
Development Of Cast Magnesium Alloys With Improved Strength
(2014-05-15)
Aim of the present work was to explore the possibility of improving strength of cast Mg by alloying additions, viz., Si and Zn+Al. All the alloys were produced by squeeze casting technique using squeeze pressure of 12MPa ...
Superplastic Deformation Behaviour Of AZ31 Magnesium Alloy
(2009-05-29)
Superplastic deformation behaviour of AZ31 magnesium alloy having initial grain sizes 8, 11 and 17μm alloy was investigated at 673 K with initial strain rates ranging from 1x10-2 to 1x10-4 s-1. Mechanical data on fine ...
Microstructure And Texture Evolution And Its Effect On Mechanical Properties In Dilute Magnesium Based AZ21 Alloy
(2009-03-05)
Dilute Mg alloys are exclusively identified for wrought structural applications in automotive industry. Any improvement in mechanical properties of alloys is possible only by grain size refinement and by the development ...
Metastable Phases In Mg-Based Alloys
(Indian Institute of Science, 2005-12-22)
Mg-based alloys form a variety of interesting structures including stable and metastable crystalline, stable and metastable quasicrystalline, nanocrystalline and amorphous phases. Many of these phases can be made to coexist ...
Creep, Wear And Corrosion Behaviour Of Novel Magnesium Alloys And Composites
(2011-04-01)
In the present investigation, MMCs have been fabricated using the creep-resistant AE42 magnesium alloy as matrix and reinforcing it with saffil short fibres (essentially δ-Al2O2) and SiC particles in various combinations. ...
Evolution Of Texture And MIcrostructure During Processing Of Pure Magnesium And The Magnesium Alloy AM30
(2011-07-01)
Magnesium is the lightest metal that can be used for structural applications. For the reasons of weight saving, there has been an increasing demand for magnesium from the automotive industry. However, poor formability at ...