Search
Now showing items 21-30 of 54
Investigations On The Properties Of TiN, NbN Thin Films And Multilayers By Reactive Pulsed Laser Deposition
(2013-10-21)
Two technologies, namely Laser Technology and Surface Modification Technology, have made rapid strides in the last few decades. The lasers have evolved from a simple laboratory curiosity to a matured industrial tool and ...
Fatigue Damage Characterization Of Carbon/Epoxy Laminates Under Spectrum Loading
(2013-10-04)
Fibre Reinforced Polymer Composites are extensively used in aircraft structures because of its high specific stiffness, high specific strength and tailorability. Though Fibre Reinforced Polymers offer many advantages, they ...
Plastic Deformation During Indentation Of Crystalline And Amorphous Materials
(2013-06-10)
Indentation hardness, H, has been widely used to characterize the mechanical properties of materials for more than a century because of the following advantages of this technique; (1) it requires small sample and (2) the ...
Design & Fabrication of Bio-responsive Drug Carriers Based on Protamine & Chondroitin Sulphate Biopolymers
(2017-10-26)
The present thesis focuses on the fabrication of bio-stimuli responsive micro- and nano-carriers for drug delivery applications. In particular, the objective of this work is to investigate the possibility of using polypeptide ...
Effect of Convection and Shrinkage on Solidification and Microstructure Formation
(2017-11-24)
Understanding the fundamental mechanisms of solidification and the relative significance of different parameters governing these mechanisms is of vital importance for controlling the evolution of microstructure during ...
Microstructural Developments and Mechanical Properties of Electroless Ni-B Coating
(2018-04-24)
Phase transformation behavior, micro structural development, mechanical and tribological properties of electroless Ni-B coating was characterized using different characterization techniques. As deposited electroless Ni-B ...
Development of Hybrid Organic/Inorganic Composites as a Barrier Material for Organic Electronics
(2018-04-16)
The ultra high barrier films for packaging find applications in a wide variety of areas where moisture and oxygen barrier is required for improved shelf-life of food/beverage products and for microbial free pharmaceutical ...
Effect of Heat Treatment and Modification on Flow and Fracture Behaviour of a Newly Developed Al-Si Based Cast Alloy
(2018-04-17)
The compression behavior of a newly developed near eutectic Al-Si based cast alloy with three different microstructures has been investigated in the present work. Microstructures with modified and unmodified Si particles ...
Interdiffusion Study in Group IVB, VB and VIB Refractory Metal-Silicon Systems
(2018-04-13)
The knowledge of diffusion parameters provides important understanding of many physical and mechanical properties of materials. In most of the applications silicides are grown by a diffusion controlled process mainly in ...