Search
Now showing items 1-10 of 177
Development And Validation Of Two-Dimensional Mathematical Model Of Boron Carbide Manufacturing Process
(2009-03-06)
Boron carbide is produced in a heat resistance furnace using boric oxide and petroleum coke as the raw materials. In this process, a large current is passed through the graphite rod located at the center of the cylindrical ...
Cooling Of Electronics With Phase Change Materials Under Constant Power And Cyclic Heat Loads
(2009-12-14)
The trend in the electronic and electrical equipment industry towards denser and more powerful product requires a higher level of performance from cooling devices. In this context, passive cooling techniques such as latent ...
Geotechnical Site Characterization And Liquefaction Evaluation Using Intelligent Models
(2009-12-09)
Site characterization is an important task in Geotechnical Engineering. In situ tests based on standard penetration test (SPT), cone penetration test (CPT) and shear wave velocity survey are popular among geotechnical ...
Tensile And Low Cycle Fatigue Behavior Of A Ni-Base Superalloy
(2009-12-14)
Background and Objective: Nickel-base superalloys, strengthened by a high volume fraction of Ni3Al precipitates, have been the undisputed choice for turbine discs in gas turbines as they exhibit the best available combination ...
Microstructure And Texture Evolution And Its Effect On Mechanical Properties In Dilute Magnesium Based AZ21 Alloy
(2009-03-05)
Dilute Mg alloys are exclusively identified for wrought structural applications in automotive industry. Any improvement in mechanical properties of alloys is possible only by grain size refinement and by the development ...
Aqueous Phase Oxidation Of Sulfur Dioxide In Stirred Slurry Reactors
(Indian Institute of Science, 2005-07-18)
Air pollution by sulfur dioxide is of great concern due to its harmful effects on environment, human beings, fauna and flora. Fossil-fuel-fired power plants are one of the major sources of SO2 emissions. Typically the ...
Understanding Context In Designing
(2009-05-25)
Everything around us that is not a simple untouched piece of nature has been designed by someone. Human society has found a great refuge in these designed objects or the artefacts, and thus has adapted vociferously to their ...
Multi-agent Consensus Using Generalized Cyclic Pursuit Strategies
(2009-05-11)
One of the main focus of research on multi-agent systems is that of coordination in a group of agents to solve problems that are beyond the capability of a single agent. Each agent in the multi-agent system has limited ...
Ion-Nitriding Of Maraging Steel (MDN 250A Grade) For Light Combat Aircraft Applications
(2009-05-12)
Maraging steels have got high strength and good toughness. Maraging steel MDN 250A grade is used for slat tracks on the leading edge of the wing of Light Combat Aircraft (LCA). This application requires high strength and ...
Structural Health Monitoring Of Composite Structures Using Magnetostrictive Sensors And Actuators
(2009-07-14)
Fiber reinforced composite materials are widely used in aerospace, mechanical, civil and other industries because of their high strength-to-weight and stiffness-to-weight ratios. However, composite structures are highly ...