Search
Now showing items 131-140 of 599
Thermoplastic epoxy designed using Vitrimer chemistries
Globally, 70 million tons of epoxy thermosets are manufactured at a perplexing rate which constitutes approximately a quarter of polymer generation by weight. A thermosetting polymer contains a permanent crosslinked network ...
Effect of thermo-mechanical treatment on the evolution of microstructure and mechanical properties in a β and a β rich α+β titanium alloy
Near β and metastable β-titanium alloys are difficult to process due to narrow processing window. Lower processing temperature causes difficulty in recrystallization of these alloys especially in the two phase conditions, ...
Uniaxial Fatigue Behavior of Freestanding Platinum-Aluminide (PtAl) Bond Coat
Pt-aluminide (PtAl) bond coat is used as a part of Thermal Barrier Coating (TBC) system on Ni-base superalloy components in advanced gas turbine aeroengines. The thickness of B2-NiAl intermetallic based diffused coating ...
Investigation of multiscale biological phenomenon using kinetic modeling and molecular dynamics simulations
Biological systems inherently function at multiple spatial and temporal scales by integrating information across these scales. In this thesis, we are interested in investigating two classes of biological phenomena that ...
Exploring Hydrological Processes, Modeling Decisions, and Deep Learning for Improved Hydrologic Assessment
Hydrological modeling is complicated by the intricate challenges and uncertainties associated with understanding hydrological processes. This thesis aims at answering some of the key research questions related to ...
Micromechanical understanding of the macroscopic features of dense granular materials
The prevalence of granular materials in nature (soil, beach sand, rubble pile asteroids) and in several industries (cement, food grains, pharmaceutical powders) has motivated extensive research towards understanding the ...
Characterization and Control of Boundary Layer Transition Caused by Distributed Surface Roughness
Distributed roughness occurs over a variety of aerodynamic surfaces such as wind-/gas-turbine blades and aircraft wings in the form of dust, insect strikes, fouling or icing. The disturbances introduced by the roughness ...
Insights into evaporation, atomization and precipitate formation of polymer droplets
Evaporation of polymer droplets is an active area of interest due to its applications in systems such as ink jet printing, thin films, spray combustors to name a few. Thus, understanding complex dynamics of evaporating ...
Effect of Processing Mg-6zn-0.2ce Through High-pressure Torsion on Its Use as a Biomaterial
Here, we investigate the effect of high-pressure torsion (HPT), a severe plastic deformation process, on the mechanical properties, corrosion, and cytotoxicity of Mg-6Zn-0.2Ce alloy, a candidate material for bioresorbable ...
Investigating Ocular and EEG parameters for pilot’s cognitive load estimation using flight simulators
Present day aircraft systems are becoming incredibly complicated with the advent of new technologies. As per International civil aviation organization’s safety report, failure of mechanical or any physical hardware has ...