Browsing Division of Mechanical Sciences by Advisor "Dutta, Pradip"
Now showing items 1-20 of 36
-
Analysis and Design of Organic Rankine Cycle based Power Plants
Solving the world’s energy crisis, and mitigating anthropogenic climate change, requires efficiently harnessing non-polluting renewable energy. Organic Rankine cycle (ORC) can be useful in this regard. ORC is Rankine cycle ... -
Analysis and Modelling of Small Scale Organic Rankine Cycle System with Scroll Expander
In recent years, the growing concern about pollution from fossil fuels has resulted in an increased effort for utilization of low-grade heat sources such as industrial waste heat, solar energy and other renewable sources. ... -
Computational Modelling Of Heat Transfer In Reheat Furnaces
(Indian Institute of Science, 2006-08-24)Furnaces that heat metal parts (blooms) prior to hot-working processes such as rolling or forging are called pre-forming reheat furnaces. In these furnaces, the fundamental idea is to heat the blooms to a prescribed ... -
Cooling Of Electronics With Phase Change Materials Under Constant Power And Cyclic Heat Loads
(2009-12-14)The trend in the electronic and electrical equipment industry towards denser and more powerful product requires a higher level of performance from cooling devices. In this context, passive cooling techniques such as latent ... -
A Design Concept of a Volumetric Solar Receiver for Supercritical CO2 Brayton Cycle
(2018-01-09)Recently, the supercritical carbon dioxide (s-CO2) Brayton cycle has been identified as a promising candidate for solar-thermal energy conversion due to its potentially high thermal efficiency (50%, for turbine inlet ... -
Development And Investigation of Two-Stage Silica Gel + Water Adsorption Cooling Cum Desalination System
(2017-09-20)The present research work caters to two important needs of rural India: i) desalination of subsoil/coastal brackish water and ii) basic refrigeration for short term preservations of agro-produce, medicines etc. Fortunately, ... -
Development of PCM coupled heat pipe for space application
Axially grooved aluminium-ammonia heat pipes are extensively used for the thermal control of satellites. Heat pipes efficiently transfer waste heat from the electronic packages, housed inside the satellite, to thermal ... -
Development of Tubular Solar Receiver with Supercritical Carbon Dioxide as Working Fluid
Over the past decade, solar powered supercritical carbon dioxide (s-CO2) based Brayton cycle has been identified as a promising candidate due to its potentially high cycle efficiency (50%, for turbine inlet temperatures ... -
Effect of Convection and Shrinkage on Solidification and Microstructure Formation
(2017-11-24)Understanding the fundamental mechanisms of solidification and the relative significance of different parameters governing these mechanisms is of vital importance for controlling the evolution of microstructure during ... -
Effect Of Mould Filling On Evolution Of Mushy Zone And Macrosegregation During Solidification
(2010-01-01)The primary focus of the present work is to model the entire casting process from filling stage to complete solidification. The model takes into consideration any phase change taking place during the filling process. An ... -
Effect of Semi-Solid Processing on Microstructural Evolution and Mechanical Behavior of Austenitic Stainless Steel
(2018-06-19)In view of the significant advantages offered by semi-solid processing, such as reduction in number of intermediate processing steps and energy input, and the potential for improving component complexity, it is of paramount ... -
Experimental Investigation Of Rheocasting Using Linear Electromagnetic Stirring
(2011-02-09)In several applications of casting, dendritic microstructure is not desirable as it results in poor mechanical properties. Enhancing fluid flow in the mushy zone by stirring is one of the means to suppress this dendritic ... -
An Experimental Study Of Instabilities In Unsteady Separation Bubbles
(Indian Institute of Science, 2007-06-11)The present thesis is an experimental study of some aspects of unsteady two dimensional boundary layers subject to adverse pressure gradient. An adverse pressure gradient usually leads to boundary layer separation or an ... -
Flow and Windage Heating in Labyrinth Seals
(2017-11-24)The ability to quantify leakage flow and windage heating for labyrinth seals with honeycomb lands is critical in understanding gas turbine engine system performance and predicting its component lifes. Variety of labyrinth ... -
Investigations on Miniature Loop Heat Pipe with Flat Evaporator
The present investigation on a miniature loop heat pipe (LHP) with flat evaporator is motivated by two factors. Firstly, miniature loop heat pipes are required for thermal management of small electronics in spacecraft with ... -
Microstructure Evolution In Semisolid Processing
(2014-09-09)In this thesis, we present an experimental and numerical study of globularization during reheating of thixocast billet having non-dendritic microstructure. The process of reheating is an important step in the semisolid ... -
Modeling Of Transport Phenomena In Arteries
(2013-05-23)Atherosclerosis is an arterial disease that occurs due to the build-up of lipids, cholesterol and other substances in the arterial wall, collectively called plaque, leading to narrowing of the vessel lumen and, in time, ... -
Multi-Phase Modeling Of Microporosity And Microstructures During Solidification Of Aluminum Alloys
(2014-04-23)Manufacturing of light-weight materials is associated with several types of casting defects during solidification. Porosity defects are common, especially in aluminum and its alloys, which initiate crack propagation and ... -
A Numerical Study of Droplet Dynamics in Viscoelastic Flows
(2017-10-05)The polymers are integral part of vast number of products used in day to day life due to their anomalous viscoelastic behaviour. The remarkable flow behaviour exhibited by the polymeric fluids including rod climbing, ...