Browsing by Title
Now showing items 996-1015 of 6373
-
Design and Development of 75 mm Fixed-Wing Nano Air Vehicle
(2018-06-11)This thesis deals with the design and development of a 75 mm fixed-wing nano-air vehicle (NAV). The NAV is designed to fit inside a cube with each side measuring 75 mm. The range and endurance of the NAV are 300 m and 2-3 ... -
Design and Development of a Hybrid TDMA/CDMA MAC Protocol for Multimedia Wireless Networks
(Indian Institute of Science, 2005-03-30)A wireless local area network (WLAN) provides high bandwidth to users in a limited geographical area. This network faces certain challenges and constraints that are not imposed on their wired counterparts. They are: frequency ... -
Design And Development Of A Liquid Scintillator Based System For Failed Fuel Detection And Locating System In Nuclear Reactors
(2009-07-02)Failed fuel refers to the breach in the fuel-clad of an irradiated fuel assembly in a nuclear reactor. Neutron detection or gamma detection is commonly used in Failed Fuel Detection and Locating (FFDL) system to monitor ... -
Design and Development of a Novel Solar Thermal Receiver
One of the most widely used solar collectors for process heating and large scale electricity generation is the parabolic trough collector (PTC), in which a tube placed at the focus of the parabola receives concentrated ... -
Design and Development of a Passive Infra-Red-Based Sensor Platform for Outdoor Deployment
(2018-04-23)This thesis presents the development of a Sensor Tower Platform (STP) comprised of an array of Passive Infra-Red (PIR) sensors along with a classification algorithm that enables the STP to distinguish between human intrusion, ... -
Design and Development of a Semi-automated System for Electro-thermo-mechanical (Etm) Phenotyping of Breast Tissues Ex-vivo
Breast cancer currently accounts for 25% of all cancers diagnosed in women globally. The conventional confirmatory diagnosis of breast cancer involves histological analysis using hematoxylin and eosin (H&E) staining, ... -
Design and Development of a Three-degree-of-freedom Parallel Manipulator to Track the Sun for Concentrated Solar Power Towers
(2018-05-21)In concentrated solar power (CSP) stations, large arrays of mirrors which are capable of changing its orientation are used to reflect the incident solar energy to a stationary receiver kept at a distance. Such mirrors are ... -
Design And Development Of An Improved Anti-Lock Braking System For Two-Wheelers
(2011-07-12)In today’s fast moving world, automobiles are facing challenges in terms of having to survive road accidents, increasing traffic, bad road-conditions and high/express ways. Brake systems play a vital role in controlling ... -
Design and Development of an Intubation Catheter Integrated with MEMS-based Sensors for Central Airway Obstruction
Airway pathology leads to alteration in fluid flow, tissue biomechanics, and loss of patency. To address this clinical challenge, we developed an intraoperative tool to locate the site of obstruction, characterize tracheal ... -
Design and Development of Capacitive Micromachined Ultrasonic Transducers
(2018-02-22)This thesis presents the design and analysis for development of a Capacitive Micromachined Ultrasonic Transducer (CMUT), a novel sensor and actuator, aimed at replacing the conventional piezoelectric transducers for ... -
Design and Development of Cryogenic Transfer Lines and Studies on Flow Phenomena
Cryogenics refers to the field of science and engineering below 123 K (-150 ºC). Also it deals with the production, utilization and maintenance of the same. Below 123 K, the so called “Permanent gases” such as Argon, ... -
Design And Development Of Customer Context-Aware Mobile Commerce Services
(2016-12-22)The technological advances in wireless networks, smart phones, social networks, embedded sensor technologies and the wide spread of mobile devices have exposed customers to number of services. With these advanced technological ... -
Design And Development Of Diaphragmless Hypersonic Shock Tunnel
(2011-03-16)The growing requirements to achieve hypersonic flights, as in the case of reentry vehicles, pose a serious challenge to the designers. This demands an understanding of the features of hypersonic flow and its effect on ... -
Design and Development of ECA based Routing Protocols for Ubiquitous Network
The ubiquitous network is a heterogeneous wireless network comprising of computing devices such as laptops, smartphones, tablets, PDAs, etc., are connected to any device at any time, anywhere that enabling mobile users to ... -
Design and Development of Fiber Bragg Grating Tactile Sensing Devices for Novel Applications in Engineering and Biomedical Fields
Among the five human basic senses, touch is thought to be the sense that makes the world 'real' to us. Tactile sensors are a category of artificial sensors that acquire information through physical touch. Tactile sensors ... -
Design and Development of Force Sensor for measurement of Tactile Friction
The sense of touch, along with the other senses, decides the perception of world around us. We touch, grip, and wear various products in our day-to-day life, be it the constant interaction we have with our mobile phones, ... -
Design and development of high speed optical modulator on silicon-on-insulator platform
Optical communication has transformed information technology and enabled the present-day data explosion. The new era of data centric society is primarily driven by the ability to communicate data at high-speed. Migration ... -
Design and Development of Hybrid Metal and Polymer Additive Manufacturing System
Additive manufacturing (AM) is a layer-based manufacturing process aimed at producing parts directly from a Computer-aided design (CAD) model. There are various types of AM systems, which can be classified based on: (i) ... -
Design and Development of Implantable Electrode Arrays for Recording Signals from Rat’s Brain
Seizure is a neurological disorder due to abnormal, excessive, and hypersynchronous discharges from an aggregate of central nervous system neurons. Epilepsy describes the clinical phenomena of a condition of recurrent and ... -
Design and development of lateral force-controlled tribosystems
In a tribo-system, the frictional resistance during a sliding process depends on several parameters. These parameters include the interacting materials, their surface topography, contact conditions such as normal load, ...