Browsing by Title
Now showing items 1-20 of 9078
-
0.5V Subthreshold Region Operated Ultra Low Power Passive Sigma Delta ADC in 180 NM CMOS Technology
With increasing demand of IoT devices, medical devices, remote sensors; the design of low power analog interface is becoming focus. Generally, for low frequency applications the Sigma Delta ADCs are used due to their very ... -
1-D And 3-D Analysis Of Multi-Port Muffler Configurations With Emphasis On Elliptical Cylindrical Chamber
(2013-08-28)The flow-reversal elliptical cylindrical end chamber mufflers of short length are used often in the modern day automotive exhaust systems. The conventional 1-D axial plane wave theory is not able to predict their acoustical ... -
1H-NMR Study of Proton Glasses - Nuclear Spin Lattice Relaxation in BPxBPI(1-x) and BPxGPI(1-x) - Effects of Disorder on the Proton Group Dynamics
Mixed systems made from a combination of ferroelectric (FE) and antiferroelectric (AFE) compounds, exhibit various effects of disorder in different temperature regions. The kind of effects observed, depend on the technique ... -
1Some studies on experimental viscosity of refrigerant vapors R12, R14, R22 and R114 and their mixtures at elevator temp. & pressure pt2
The present investigation has been undertaken using two oscillating?disc viscometers. The first viscometer is a modified version of an earlier model to suit refrigerant vapours at pressures up to five atmospheres and ambient ... -
2,3-Dideoxy Sugars in Glycoconjugations and Cyclic Oligosaccharide Synthesis
2,3- Dideoxy sugars are versatile synthons for organic synthesis. The applications are diverse in biological systems and organic synthesis. In the first part of the thesis, 2,3-unsaturated sugars are used for the ... -
2-Level Page Tables (2-LPT): A Building Block for Efficient Address Translation in Virtualized Environments
Efficient address translation mechanisms are gaining more and more attention as the virtual address range of the processors keeps expanding and the demand for machine virtualization increases with cloud and data center-based ... -
2D Compressible Viscous Flow Computations Using Acoustic Flux Vector Splitting (AFVS) Scheme
(Indian Institute of Science, 2007-05-07)The present work deals with the extension of Acoustic Flux Vector Splitting (AFVS) scheme for the Compressible Viscous flow computations. Accurate viscous flow computations require much finer grids with adequate clustering ... -
2D Piezotronics: Performance to Functionality
In the pursuit of interactive electronic devices, there is a need for smart materials which can serve multiple functionalities. 2D (two-dimensional) layered materials have gained attention in semiconductor technology because ... -
35 CI NQR instrumentation and investigation of some chloropyridinols and chloropyridine-N-Oxides
The detection of quadrupole resonance absorption requires application of a radio frequency magnetic field H? of suitable frequency. The rf field H? should be such that ?H?T?T? ? 1 to avoid saturation, but not be so small ... -
3D Dosimetry using optical tomography and electronic portal images
The primary goal of this thesis is to develop techniques to quantify the radiation dose distributions used in radiotherapy for cancer treatment. It aims at developing a physically profound calculation model for the transit ... -
3D end wall flow in a compressor cascade
Improvement in calculation methods for end-wall boundary layers of blade rows can only come about through a greater understanding of the physics of the flow in that region. Most of the integral methods take the integration ... -
A 3D High Resolution Unstructured Viscous Flow Solver
(2011-10-11) -
A 3D Lattice Model For Fracture Of Concrete : A Multiscale Approach
(2013-09-10)It is quite well known that fracture behavior of concrete is complex and is influenced by several factors. Apart from material properties, geometric parameters influence fracture behavior and one notable phenomenon is size ... -
3D Packaging for Integration of Heterogeneous Systems
With several new applications getting developed around wearable technologies for Internet of Things (IoT), there has been a growing need for development of the miniaturized systems. Emerging applications in healthcare, ... -
3D printing for biomedical applications: Hybrid nanoparticle reinforced hydrogels for soft tissue regeneration and bone flaps for cranial reconstruction
This dissertation focuses on the quantitative insights into process v science behind the development of tissue-engineered grafts using additive manufacturing (AM) technology. Additive manufacturing, commonly referred to ... -
3D-Printing of Lunar Soil Simulant by Direct-Extrusion method.
The extrusion-based additive manufacturing (EAM) technique is recently being widely employed for the 3D printing of complex-shaped components made of ceramic powder (containing irregular-shaped particles) when it is cast ... -
4D Printing of Polymer Composites to Engineer Resorbable and Deployable Implants
Medical implants include products that are used to replace or restore the function of any damaged organ or tissue inside the body. The current generation of implants are mostly made from non-degradable materials and are ...